Schmalz SCPSt 07 G02 NC, Руководство по эксплуатации

Страница: 63 / 74

Installation
EN-US · 30.30.01.01598 · 02 · 01/18 63 / 74
Observe the following connection instructions:
• The SCTMi can be operated only via Ethernet communication. This requires corresponding hardware
components (master).
• The data cable must be shielded. The cable shield must be equipotentially bonded.
• The functional ground of the voltage supply cable must be equipotentially bonded.
• The SCTMi is designed to supply sensors and actuators with potential separation.
• It has a 5-pin M12 connector with L-coded design for electrical connection.
8.6 Pin Assignments, L-coded M12 Connector for Voltage Supply
M12-L connector Pin Symbol Wire color
1)
Function
1
2
3
4
5
1 U
s
Brown Power supply for sensor
2 GND
A
White Actuator ground
3 GND
s
Blue Sensor ground
4 U
A
Black Power supply for actuator
5 FE Gray Functional ground (earth)
1)
When using a Schmalz connection cable (see accessories)
8.7 Pin Assignments, D-coded M12 Socket for Industrial Ethernet
M12-D socket Pin Symbol
2
1
4
3
1 TX+
2 RX+
3 TX-
4 RX-
Thread FE
8.8 Instructions for Start of Operations
To operate the SCTMi, the supply voltage and at least one communication line must be connected.
The integrated switch can be used to loop through the communication line.
The supply voltage for the sensors (U
S
) and the supply voltage for the actuators (U
A
) are electrically iso-
lated and can come from different sources.