Schmalz SCPi FS RP, Руководство по эксплуатации

Страница: 21 / 58

General Description of Functions
EN-US · 30.30.01.01602 · 01 · 10/18 21 / 58
5.3.4 Basic Menu
All of the settings for standard vacuum switch applications can be configured and read from the basic
menu.
1. Use or to select the desired adjustable parameter.
2. Confirm the selection of the parameter with the button.
3. Use the or buttons to set the value of the parameter.
4. To save and exit the menu, press and hold the button.
ð The displayed value flashes to confirm.
Display code Parameter Explanation
5P1
or
FX1
Switching point 1 / upper window
point 1 —
rP1
or
FL1
Reset point 1 / lower window
point 1 —
hy1
or
-L-
Hysteresis switching point 1 (win-
dow mode) or leakage limit 1 (CM
mode) —
5P2
or
FX2
Switching point 2 / upper window
point 2 —
rP2
or
FL2
Reset point 2 / lower window
point 2 —
hy2
or
L-2
Hysteresis switching point 2 (win-
dow mode) or leakage limit 2 (CM
mode) —
tCX
Teach-in function
No
/
5P1
/
5P2
CAL
Calibrate zero offset
Calibrate integrated vacuum sensor,
No
/
yE5
EF
Additional functions Menu: Additional functions
1mF
Information Menu: Information
Overview of the display codes in the basic menu
Calibrating the vacuum sensor
1. Select the parameter or display code
CAL
with the or buttons.
2. Confirm using the button.
3. Use the or buttons to select
YE5
.
4. Press the button to confirm.
ð
The vacuum sensor integrated in the ejector is now calibrated.