OPERATOR'S MANUAL
12
Subject to technical changes
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
LuchsNT
Version: 27142-A.1
3.10
Sensor button connection diagram
LED control unit
ON/OFF
In the delivery state, the "Start/Stop" input 9
is switched via
DIP3 = OFF as a
latching input.
Delivery condition: Wire jumper between 24 V and
If "Start/Stop" input 9
is switched via
DIP3 = ON as a
button input, then the spotlights can be switched
ON/OFF via a potential-free sensor button.
RGB control unit
ON/OFF
With piezo operating mode
For the LED-white control unit or analog operation, the
sensor button illumination can be connected to LED1
as shown in the picture on the left. The switching
operation is reported back.
For the RGB control unit, an RGB button can be
optionally connected which visually reports back the
spotlights colours.
In order to control the "Piezo" function of fixed colours
and colour gradients, an additional sensor button must
be connected to the "COLOR" input. The keying
pulses at the "COLOR" input are used to switch
between the individual moods.
Functional description, see section 4.1.3
The 27138 "Sensor button" operator's manual applies here
3.10.1 Sensor button - connection assignment
Wire colour
Functions
White
Switching contact S1
Brown
Switching contact 24 V
Grey LED1
Yellow LED2
Green LED3
3.10.2 Sensor button - technical information
Effect of switching:
Pulse activated one time
Electrical function:
normally open / N/O contact
Electrical data:
I
max
= 200 mA / U
B
= 24 V DC
