OPERATOR’S MANUAL
71
C2G rondo
Version: 27201 - H
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
8
Shutdown / Overwintering
8.1
Empty the pool
8.2
Face plate assembly overwintering
Remove the face plate assembly and store at room temperature.
8.3
Draining the pump
Warning! Risk of damage!
If there is a risk of freezing, then the facility must be made winterproof. For this
observe the following recommendations:
fig. 33
Warning! Risk of damage!
Make sure you have protected the whole
swimming complex adequately against
frost. Observe the instructions issued by
the manufacturer of the pool!
•
Empty all the water out of the pool,
•
or let the water out at least until it is
below the level of the jet head.
•
Switch off the master switch!
fig. 34
07
O-Ring
11
Plug screw
Screw out the plug screw (11) and drain
the water.
Warning! Risk of damage!
Make sure that all the water runs off! Also
drain the pipework connected to the
pump, if any!
Then screw the plug screw (11) back in
again with a new O-ring (07).
When restarting please observe the
instructions in section 6.
8243
8244
23
