background image

www.schischek.com

Description size S

The new RedMax actuators are a revolution for safety, fire and shut-off
dampers, VAV systems, ball valves, throttle valves and other motorized
applications for HVAC systems, in chemical, pharmaceutical, industrial
and Offshore-/Onshore plants, for use in EEx-areas zone 2 (gas) and
zone 22 (dust).
Highest protection class (ATEX) and IP 66 protection, small dimensions,
only 3,5 kg weight, universal functions and technical data, an integrated
heater and an optional stainless steel housing guarantee safe operation
even under difficult environmental conditions. High quality brushless
motors guarantee long life.
All actuators are programmable and adjustable on site. Special tools
or equipment are not required. 5 motor running times and 2 torques as

well as 2 spring return times - according to the actuator type - are

selectable or adjustable on site. The integrated universal  power supply
is self adaptable to input voltages in the range of 24 to 230 VAC / DC.
The  actuators  are  100%  overload  protected  and  self  locking.

RedMax-...-BF

 actuators are equipped with spring return fail safe function,

with integrated aux. switches for end position indication and an intrinsic
safe circuit to connect an external passive potential free thermostat.
Standard shaft connection is a double squared direct coupling with
12 x 12 mm.
Different accessories are available to adapt aux. switches, terminal
boxes  or  adaptations  for  ball  valves  and  throttle  valves.

Application

Highlights

Firedamper

Damper

Ball valve, Throttle valve

Schischek GmbH 

Germany D-90579 Langenzenn, Mühlsteig 45, Gewerbegebiet V, Tel. ++49 (0)9101-90810, Fax  ++49 (0)9101-908177, Email [email protected]

RedMax-5.10-BF

RedMax-   15-BF

RedMax -   ...-BF  - VA

RedMax -   ...-BF  - CT

E X P L O S I O N P R O O F

Type

Torque

Supply

Motor running time 

Spring return

Control mode Additional features

Wiring diagram

RedMax-  5.10 - BF   5 Nm & 10 Nm

24..230VAC/DC 3/15/30/60/120 sec. at 90° 3 or 10 sec. at 90° On-off, 3-pos 2 contacts (5/85° ) + EEx-i circuit   SB 7.0/7.1

RedMax-     15 - BF 15 Nm

24..230VAC/DC 3/15/30/60/120 sec. at 90° 3 or 10 sec. at 90° On-off, 3-pos 2 contacts (5/85° ) + EEx-i circuit   SB 7.0/7.1

RedMax- ... - VA

Type as above but with stainless steel housing (AISI 316) for aggressive ambient (12x12 shaft, shaft manual override, cable glands and hollow rivet nickel-plated)

RedMax- ... - CT

Type as above but with Al housing and amercoat painting (12x12 shaft connenction, shaft manual override, cable glands and hollow rivet nickel-plated)

Electrical, explosion proof rotary actuators - size S
On-off / 3-pos , 24..230 VAC/DC,  95° angle of rotation, potential free contacts, EEx-i circuit
5/10 Nm - 15/30 Nm without and 5/10 Nm - 15 Nm with safety operation (spring return)
PTB-tested in acc. with ATEX RL 94/9/EG for zone 2, 22.

u

For all type of gas, mixtures, vapours and dust for use in zone 2 and 22

u

Universal supply unit from 24 to 230 V - AC/DC

u

EEx-i circuit for directly connection of a passive potential free safety thermostat

u

2 integral aux. switches , switching at 5° and 85° angle of rotation

u

5 different motor running times (3-15-30-60-120 sec./90°), adjustable on site

u

2 different spring return running times (3-10 sec./90°), selectable on site

u

On-off and 3-pos control with spring return function

u

5 - 10 - 15 Nm  actuators in the same size (S)

u

100 %  overload protected, Self locking

u

Compact design and small dimension  (l x w x h = 210 x 95 x 80 mm)

u

Direct coupling to the damper shaft with double-squared connection 12 x 12 mm

u

95° Angle of rotation incl. 5° pre-tention

u

Robust aluminium  housing (optional stainless steel or amercoat painting)

u

IP 66 protection

u

Simple manual override i preparation for comfortable manual override

u

Gear made of stainless steel and sinter metal

u

Only 3,5 Kg weight

u

Integral heater for ambient temperatures down to -40°C

u

Integral safety temperature sensor

u

Integral equipment for manual adjustment (push button, lamp, switch)

u

Preparation for adaptable aux. switches type RedSwitch

u

Range of accessories

RedMax - Revolution

Compact - Easy installation - Universal - Cost effective - Safe

Subject to change

Содержание RedMax-...-BF-CT













Отзывы: