manualshive.com logo in svg

Schiller FRED easy, Руководство пользователя

Поделиться
Скачать
Schiller FRED easy Скачать руководство пользователя страница 8

1

Safety Notes

1.3

Intended Use

Page 6 

A

rt.

 no.

: 0-4

8

-00

13 Rev. m

FRED easy

1.3

Intended Use

The 

FRED easy®

 is an automated external defibrillator (AED) used for the treat-

ment of ventricular fibrillation (VF) and ventricular tachycardia (VT).

The device may be used with the appropriate electrodes on either adults or chil-
dren.

The device must only be used if the following symptoms are found:

– not responsive
– no respiration
– no pulse

The device must 

not

 be used if the patient:

– is responsive
– is breathing
– has pulse

The 

FRED easy®

 is an emergency device and must be ready for operation at

any time and in all situations. Make sure that 

– the device is always equipped with a sufficiently charged battery and that a

spare battery is at hand

– An empty battery must not be reused and must be disposed of immediately.

Only operate the device in accordance with the specified technical data.

Do 

not 

use this device in areas where there is any danger of explosion or in the

presence of flammable liquids, flammable anaesthetic agents or in places where
the ambient air's oxygen concentration is higher than 25 %.

Содержание FRED easy































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды