manualshive.com logo in svg

Schiller FRED easy, Руководство пользователя

Поделиться
Скачать
Schiller FRED easy Скачать руководство пользователя страница 63

 Page 61

Versions

5

User Guide

Configuration Ethernet/Online using FRECO

5.4

A

rt.

 no.

: 0-4

8

-00

13 Rev. m

FRED easy

5.4.3

Configuring the date and time as well as IP addresses 

without using 

FREDCO®

Setting the date/time and/or IP ad-
dress for Ethernet/Online versions

This is only available if the parameter "Setting date and time" and/or “IP Address” has
been activated in FREDCO®.

1. Insert the battery and wait for the prompt to set the date and time and/or to con-

figure the IP address.

2. Press the green button 

. Three fields are displayed: date, time, summer/winter

and/or 3 IP address fields.

3. Press the orange button 

 

to change the value.

4. Press the green key 

 to jump to the next value.

5. Press the green button 

 to jump to "Apply" and press the orange button 

 

to

confirm and apply the changes.

When you have confirmed the values, the menu disappears and the device can be
switched on.

• Date and time setting can also be done on 

non Ethernet/Online

 devices if the pa-

rameter has been activated in FREDCO.

• When the battery has been inserted, a self-test is performed. If no errors are de-

tected during this self-test, the date and time as well as IP address for the Ethernet/
Online version can be set, if configured so.

• If the green button is not pressed within a couple of seconds, the message disap-

pears automatically and the device status indicator starts blinking. (For the Online
and Ethernet version, the device first recommends configuring the IP address be-
fore the message disappears).

Содержание FRED easy































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды