manualshive.com logo in svg

Schiller FRED easy, Руководство пользователя

Поделиться
Скачать
Schiller FRED easy Скачать руководство пользователя страница 24

3

Initial operation

3.1

Inserting the battery

Page 22 

A

rt.

 no.

: 0-4

8

-00

13 Rev. m

FRED easy

3 Initial operation

3.1

Inserting the battery

Danger of explosion

 — The 

FRED easy®

 must not be used in areas where there is any

danger of explosion. Areas may be susceptible to explosion if flammable substances
(gas), flammable anaesthetics, or products used to clean or disinfect the skin are used.
Moreover, the defibrillator must not be used in an environment that is favourable to com-
bustion. This is the case when ambient air contains more than 25% oxygen or nitrous ox-
ide (laughing gas). Oxygenation in the vicinity of the defibrillation pads must be strictly
avoided. Less than 25% oxygen in the ambient air is considered safe. Dangerous, high
oxygen concentrations can only occur in oxygen masks or in enclosed areas, such as hy-
perbaric chambers.

Danger of explosion!

 The battery must not be exposed to high temperatures or

disposed of with household waste.

Do not expose the battery to chemicals that could dissolve ABS, polypropylene,
polyvinyl chloride, nickel, mylar or steel.

Do not short-circuit, cut, destroy, burn or charge (Li/MnO2 battery) a battery.

Patient hazard! — 

Incorrect battery capacity indication 

A new battery is initialised by the device when inserting it and is allocated to this
device. It must not be inserted in another device.

Replace the battery if the device indicates a battery problem. A defective battery
must not be used.

Turn off the device before removing the battery.

Patient hazard — 

Ensuring operational readiness!

Make sure that the device is always equipped with a sufficiently charged battery
and keep a spare battery on hand.

The expiration date of a new battery, stored in its original packaging at a temper-
ature of 25°C, is indicated on its packaging. It must not be used beyond this date.

The battery must remained packed in its original plastic packaging (blister) dur-
ing the entire storage time. The plastic packaging must only be removed when
the battery is used.

Do not expose the 

FRED easy®

 to direct sunlight or to extreme hot or cold. An

ambient temperature higher than 25°C has an adverse effect on the battery life.

Li/MnO2

Содержание FRED easy































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды