Schiit SOL, Руководство пользователя

Страница: 7 / 16

the desired cartridge weight. See Figure I.
3 To adjust the VTA, loosen the 1/16” set
screw on the side of long arm of the plinth.
Use the small knob to adjust the height of
the pivot pin as needed. Then tighten the set
screw to lock it in place. This adjustment
can be done when the record is playing. See
Figure J
4 To adjust cartridge angle, turn the lateral
counterweight clockwise or counter-clock-
wise as necessary. The goal is to keep the
tonearm as straight up and down as pos-
sible when playing a record. See Figure K.
5 To adjust platter height, loosen the set
screw on the bottom of the plinth using the
3/8” allen key. Raise and lower the bearing
shaft as needed, then tighten the set screw.
VTA CARTRIDGE ANGLE PLATTER HEIGHT
FIGURE J
FIGURE K
FIGURE L