Schiit SOL, Руководство пользователя

Страница: 6 / 16

We recommend you watch the Sol
Setup video linked to from the Sol
page at schiit.com/sol-setup
However, we’re also providing a list of
adjustments here for your reference.
Depending on your particular setup,
you may not need to do all of these
adjustments.
1 To adjust the tonearm pivot cup height,
loosen the set screw on the side of the
tonearm ring, and carefully slide it up or
down until your cartridge is level. If your
cartridge is already level, you don’t need to
make this adjustment. If you can’t get your
cartridge level, you may need to adjust plat-
ter and motor pulley height. See Figure H.
2 To adjust the stylus force, you will
need some type of gram scale. Different
cartridges have different recommended
stylus forces, but it is typically around 1.75
grams. Using the 5/64” allen key, loosen
the set screw on the bottom of the tonearm
counterweight and move the counterweight
forwards or backwards as needed to achieve
I
ADJUSTMENT
TONEARM HEIGHT STYLUS FORCE
FIGURE I FIGURE H