Schiit SOL, Руководство пользователя

Страница: 12 / 16

REFERENCE
1
3
4
5
6
7
8
1 Plinth. Yes, this entire Y-shaped piece is
the plinth. It ties everything together. Except
the motor pod, of course.
2 Platter. This is where the record sits.
2
9
3 Platter Mat. This decouples the record
from the platter.
4 Motor Pod. This spins the platter with a
rubber belt (5).
5 Belt. Use this to spin the platter. Replace
when it breaks.
6 Headshell. This is where you install your
cartridge. Although this photo shows a
cartridge, Sol is not supplied with one.
7 Tonearm. This entire assembly (carbon
fiber, aluminum, and brass) lifts off of the
pivot pin for easy swapping.
8 Cueing Lever. Up lifts the needle off the
record, down drops the needle on the record.
Be gentle when using the cueing lever, drop
it down slowly so the needle makes soft
contact with the record.
9 Cueing Bar. This supports the tonearm
when the cueing lever is up.