www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
2. Device description (Fig. 1-2)
1
Base plate
2
Pillar
3
Drilling table
4
Machine head
5
Keyless drill chuck
6
Grips
7
Drill chuck protection
8
Depth stop
9
Motor
10
On-Off switch
11
Belt protective hood
12
Locking grip for belt tension
3. Scope of delivery
Base plate (1)
Pillar (1)
Drilling table (1)
Machine head (1)
Keyless drill chuck(1)
Grips (3)
Chuck protection (1)
Fastening screws (3)
Allen key (hexagon socket screw key) 4mm (1)
Operating manual (1)
•
Open the packaging and remove the device care-
fully.
•
Remove the packaging material as well as the
packaging and transport bracing (if available).
•
Check that the delivery is complete.
•
Check the device and accessory parts for trans-
port damage.
•
If possible, store the packaging until the warranty
period has expired.
m
Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags,
film and small parts! There is a risk of swallowing and
suffocation!
4. Intended use
This pillar drill is designed for drilling metal, plastic,
wood and similar materials. It is intended for use in the
private sector only.
Food and harmful materials may not be processed with
the equipment. The drill chuck is only designed for use
with drill bits and tools with a shaft diameter of 1.5 to 13
mm, and for cylindrical tool shanks. The equipment is
intended for use by adults only.
The equipment is allowed to be used only for its pre-
scribed purpose. Any other use is deemed to be a case
of misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
resulting from such misuse.
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope you have a lot of fun and success using your
new machine.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability for
damages to the product or damages caused by the prod-
uct that occurs due to:
• improper handling,
• noncompliance of the operating instructions,
• repairs by third parties, not by authorized service
technicians,
• installation and replacement of non-original spare
parts,
• non-intended use,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating in-
structions, you have to meet the applicable regulations
that apply for the operation of the machine in your coun-
try. Keep the operating instructions package with the
machine at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. Read the instruction manu-
al each time before operating the machine and carefully
follow its information. The machine can only be operated
by persons who were instructed concerning the opera-
tion of the machine and who are informed about the as-
sociated dangers. The minimum age requirement must
be complied with. In addition to the safety requirements
in these operating instructions and your country’s ap-
plicable regulations, you should observe the generally
recognized technical rules concerning the operation of
woodworking machines.
We cannot accept any liability for damage or accidents
which arise due to a failure to follow these instructions
and the safety instructions.
19 / 52
GB
