www.scheer-heizsysteme.de
heater to move®
boiler setting
FI-switch
main fuse
automatic
Circuit breaker
Heating rod
elective-
Diesel/
Hybrid
switch
STB
display
arrow buttons
(tempe -)
P button
(Program/Confirm)
•
Switch the
diesel or hybrid selector switch
to the desired position
•
Set
FI-switch
and the switches
main fuse automatic
and C
ircuit breaker Heating rod
to
„
on
“
•
Press the
P button
on the controller. The
display
alternates between SP and the set tempera-
ture. Use the
arrow buttons
to set the desired target temperature and confirm with the
P but-
ton
. SP and the set target temperature light up alternately again. Press the
P button
to display
the boiler temperature
disassembly
•
Close ball valves at flow and return flow� drain system at lowest point if possible
storage
•
Never turn the unit
upside/down
•
Never lift
or
lash
by the
fittings.
•
The device must be stored
dry, dust-protected
and
frost-free
•
Disconnect
from
power source
for storage
•
After use store only when
completely emptied
•
Turn
fill
and
drain valves
to
45° position
This ensures that no damage is caused to the device during transport or storage
11
