BASCAP_BF_EN
V04 | 08.2019
39
Operation
Switching off
End of operation
Option 1: Operator service mode
►
Perform the daily cleaning routine.
The machine switches to standby once the cleaning programme is finished.
Option 2: External drinking and waste water tank
►
Empty the drinking water tank and rinse it with fresh water.
►
Empty the waste water tank and clean it thoroughly with fresh water.
Option 3: Milk system
►
Remove the milk container.
►
Empty and clean the milk container.
Lengthy downtimes (more than 1 week)
Proceed as for end of operation. Additional steps:
►
Disconnect the power plug of the machine from the power supply.
The machine is de-energised.
►
Close the stopcock of the drinking water supply.
CAUTION!
Risk of machine
damage!
There is a risk that the water pump may run dry.
When taking the device back into service, the stopcock of the drinking water supply
must be opened before the machine is switched on.
Add ground coffee
•
[DECAF] field has been pressed in order to
dispense a decaffeinated beverage.
•
The inlet for ground coffee and cleaning tab-
lets has been opened.
►
Add ground coffee to dispense a decaffein-
ated beverage.
►
Close the inlet for ground coffee and clean-
ing tablets.
►
If the message persists: Contact your ser-
vice partner.
Flavour 1 empty
Flavour 2 empty
Flavour 3 empty
Flavour 4 empty
•
The corresponding bottle is empty.
•
The sensor is defective.
►
Place full bottle in the Flavour Point and
connect.
►
If the message persists: Contact your ser-
vice partner.
Display message
Cause
What to do
After a long period of out of operation, the machine must be cleaned after it has been switched
on.
Failure to do so will result in a loss of warranty coverage in the event of damage.
