Schaeffler GreaseCheck, Руководство пользователя

Страница: 15 / 26

Schaeffler Technologies BA 35 13
Analogue output
■
If an analogue output is not used, the analogue output must be
applied to an unwired terminal with zero potential.
The controller is supplied factory fitted with a 120 ohm resistor
for CAN bus communication. This can be deactivated by means of
a jumper. The controller box must be opened and the jumper
moved to the corresponding position.
Figure 4
Connection and pin assignment
00
0B70E6
00 0B70E6