Scell-it E-500RA, Руководство пользователя

Страница: 3 / 20

E-500RA - User Manual
• 3
EN
FR
IT
DESCRIPTION OF THE TOOL
1. BASIC CHARACTERISTICS
2. TOOL OPERATION
Lenght:
272 mm
Height:
264 mm
Width (over the angle valve) :
99 mm
Weight:
1,25 kg
Stroke:
17 mm
Stroke force at 0.6 MPa:
7.3 kN
Air consumption:
1.5 L / stroke
Working pressure:
5 to 7 bars
Front nozzle diameter:
22.5 mm
Front nozzle length:
64 mm
Capacity:
Occasional use or small series Intensive use
Description of the tool:
1 - Nose-piece
2 - Mandrel tube
3 - Trigger
4 - Revolvable air supply
5 - Mandrel container
6 - Ring relief
7 - Unscrewing button
Replacement of nose-pieces:
Connect the tool to the source of compressed air, depress the
trigger and screw out the nose-piece /figure 1 - pos. 1/ with a
spanner no. 12. Screw on a new nose-piece /ace.te the chart/
and tighten it.
Now you can release the trigger of the tool.
Recommended numbers of nose-pieces with respect to rivet
diameters
(does not apply for all types of rivets).
FIG.1
The manufacturer equipped the tool with an nose-piece /fig. 1 - pos.1/ for a rivet Ø4.8-5.0.
Riveting with blind rivets of different diameters (further on referred to as BR) requires use of
appropriate nose-pieces /figure 1 - pos. 1/ that are located in the accessories casing of the
tool.
Ø RIVET 2.4 3.0 3.2 4.0 4.8 5.0
ALUMINIUM
STEEL
STAINLESS
STEEL
Ø Rivet Marking of nose-piece
4.8 - 5.0 nose-piece no. 5
4.0 nose-piece no. 4
3.0 - 3.2 nose-piece no. 3
2.4 nose-piece no. 2.4
The tool is equipped with revolving air supply /fig. 1 - pos.4/ which enables manipulation with air
supply before as well as during tool operation, air hose does not obstruct riveting in any position.
The tool is equipped with a trigger /fig.1 - pos.3/. Released trigger enables pushing a rivet into the
tool (the tool is ready for riveting), depressing the trigger shall fix the rivet.