6
myScatterBox.com
Installation - Multiple Units
On larger commercial or retail installs such as bars, shopping centres and hotels you could connect
multiple units together to enable a number devices to be viewed as separate digital TV channels.
This could be used to distribute sports channels around a pub or information channels to hotel
rooms.
Up to five MOD200s can be connected
using the method shown below.
Connect the DVR (or other video equipment) to HDMI input of the first MOD200.
1
The first MOD200 merges the TV aerial signal via the RF input with the modulated HDMI
signal from the DVR to produce a combined RF output.
2
The second MOD200 merges combined TV aerial and DVR signal via the RF input with
the modulated HDMI signal from the Sky box to produce a new combined RF output.
3
Every time you add an additional MOD200 you will need to change its LCN and
Channel Number (Frequency) so they are all uniquely identified.
4
Optional - Use an RF distributor to view the images on multiple TVs.
5
The final step is to re-tune all the TVs to discover and view the video images as digital
TV channels. These channels are identified by their LCN number.
6
5
3
1
6
2
4
RF Distributor
(Optional)
MOD200
Digital Modulator
MOD200
Digital Modulator
TV Aerial
Camera 1
Camera 2
Camera 3
Camera 4
DVR
Sky Box
HDMI
HDMI
TV 1
TV 2
TV 3
Note:
If you are using a Masthead amplifier the installation is slightly different. Information and example of this can be
seen on page 7.
