5
Doc ref: xMOD200
Installation - Single Unit
Below is a typical example of how the MOD200 may be installed into a residential property
or smaller retail and commercial environments. If you are installing into a system which uses
a “Masthead” amplifier see page 7 on how this is achieved.
Note:
If you are using a Masthead amplifier the installation is slightly different. Information and example of this can be
seen on page 7.
Connect the DVR (or other video equipment) to the HDMI input of the MOD200.
1
The MOD200 merges the TV aerial signal via the RF input with the modulated HDMI
signal from the DVR to produce a combined RF output.
2
Optional - Use an RF distributor to view the CCTV images on multiple TVs throughout
the property.
3
The final step is to re-tune all the TVs to discover and view the video images as digital
TV channels. These channels are identified by their LCN number.
4
2
1
3
4
RF Distributor
(Optional)
MOD200
Digital Modulator
TV Aerial
Camera 1
DVR
HDMI
TV 1
TV 2
Camera 2
Camera 3
Camera 4
