9
Doc ref: xMOD200
Menu System
Note:
The MOD200 will work out of the box in most cases. If conflicts arise with existing equipment or when using multiple
MOD200s on the same site then you will only need to change the settings highlighted in
Gold
as explained on
page 12.
Main Menu
Parameter
Default Value
Function
Network Setting
Country
UK
Set region in which the MOD200 will be used.
Original Net
9018
The unique ID of the network who originally broadcast the
stream. In the UK this must be set to 9018.
Network ID
12289
The unique ID of the network who is currently broadcasting
the stream e.g. BSkyB
Network Name
Private Network
Set the name of the network if desired.
TS ID
128
Choose a specific transport stream from the broadcasting
network.
NIT Version
28
Allows users to manually set the NIT version.
CH & Enc Setting
Service Name
AlienDVR
Set the name for the channel as you want it to appear in
the channel list on the TV.
Provider Name
AlienDVR
Gives the option to manually enter the name of the
provider. e.g. BBC, BSkyB.
Service ID
1
Allows users to manually set the NIT version.
LCN
800
Set what digital TV channel number the MOD200 is
assigned to.
Video Output
H.264
Allows users to manually set the video compression.
Audio Output
MPEG-2
Allows users to manually set the audio compression.
Video Bitrate
12Mbit
Higher bitrates produce better quality images but they
can’t be transmitted as far.
Audio Bitrate
192Kbit
Higher bitrates produce better quality audio but it can’t be
transmitted as far.
RF Setting
Frequency
CH60 786.00 MHz
Allows users to manually set the channel band/frequency.
Constellation
64QAM
Set the modulation scheme used. Must be set to 64 QAM
for use with DVB tuners.
Guard Interval
1/32
The Guard Interval is the amount of time between distinct
transmissions so they do not interfere with each other
through echoes, reflections etc. 1/32 offers the lowest
protection but the highest data rate. 1/4 offers the highest
protection but the lowest data rate.
Code Rate
7/8
Set the code rate for useful information vs total information
sent. The higher the code rate the stronger the signal.
FFT Carrier
8K
Must be set to 8K for use with DVB tuners.
Bandwidth
8 MHz
Set the bandwidth of the modulated signal. Must be set to
8M for use with DVB tuners.
RF Level Adj
-30dB
Control the gain to counter the effects of transmission
distance and other equipment.
Information
Shows the firmware version of the MOD200 unit.
Load Default
Allows the user to restore default settings.
Change Password
Allows the user to change to password used when accessing the menu system.
