Scantool COMPACT 110, Инструкции по безопасности и руководство оператора

Страница: 22 / 37

COMPACT 110
COMPACT 110
Operator’s manual for drilling machine - 22 -
Drilling holes of a diameters greater than 18mm to 32mm should be carried out by
preliminary drilling where a diameter of a first hole should be between 0,7 to 0,8 of a final
hole diameter. Holes grater than 32mm should be drilled initially with a drill bit of a 18mm
diameter, then with a drill bit of a 0,8 diameter of a final hole, and finally with use of a drill bit
with diameter of a desired size of finished hole. For example: When drilling a 23mm diameter
hole it is recommended to initially drill it using a drill bit of 16mm in diameter and to increase
a size of a tool gradually to reach a diameter of the desired hole; 40mm hole should be
drilled consecutively with drill bits of diameters: 18mm, 32mm, 40mm.
Holes diameter
[mm]
Drills diameter [mm]
Number
of passes
Drilling
Expanding the
hole by driling
Expanding the
hole by driling
for 18 for 18 1
18,1 - 32
0,7 final hole
diameter
final hole diameter 2
32,1 - 40 Ø18
0,8 final hole
diameter
final hole diameter 3
V. ELECTRICAL DIAGRAM
1. Electrical diagram COMPACT 110 /120V