Scantool COMPACT 110, Инструкции по безопасности и руководство оператора

Страница: 16 / 37

COMPACT 110
COMPACT 110
Operator’s manual for drilling machine - 16 -
The drive and the slider can be slid up and down smoothly using the lever (1), making
the screws (2) fixing the strip to the drill body visible through the openings in the slider (5). To
loosen screws (2), the slider should be placed in such a position (using levers) so that the
openings make the screws visible. After loosening the screws slide the slider up and down
several times so that the pressure strip aligns itself and cancels clearance.
After carrying out these activities and canceling clearance, tighten screws (2) starting
from the middle screw. The slider should be located symmetrically relative to the middle
screw. Next, tighten the neighboring screws (2) moving the slider in the degree necessary for
making them visible.
Then, tighten screws (3) until any noticeable resistance is felt. When the screw in this
position and blocked with a hexagonal key, tighten counter nut (4). The screws (3) counteract
the machining force and protect the pressure strip from shifting during operation.
3. Machine start-up
In order to start the machine press the main switch MAGNET (01) on “I” button. By
pressing green button (02) MOTOR on “I” start the motor.
Canceling clearance