Scanner Master Pro-1060, Руководство пользователя

Страница: 22 / 39

Srvc: Allows you to select the type of service search. Default is Pub Safety .
Press ◄ or ► to select Pub Safety , Aircraft , Amateur , CB , Marine , FRS/GMRS/MURS , or Railroad .
Contents
Groups (PubSafty,Aircraft,Amateur only): Allows you to select which groups that will be searched for Pub Safety , Aircraft , and Amateur service
searches. Default is All Groups On .
Press ◄ or ► to select each group then press SEL/ENT to enable the group. A * (asterisk) will appear in front of each selected group to be searched.
Channels (CB,Marine,F/G/MURS only): Allows you to select which channels will be searched for CB , Marine , and FRS/GMRS/MURS service searches.
Default is All Channels .
Press SEL/ENT . Press ▼ or ▲ to locate the channels you want to scan. Press SEL/ENT to disable or enable each channel. A * (asterisk) will appear
in front of each selected channel to be searched.
Modulation: Selects the receive mode for the Service Search object. Auto will work fine unless you want to force a mode. Default is Auto .
Press ◄ or ► to select:
Auto - automatically detects the receive mode.
AM - forces AM mode.
FM - forces FM mode.
NFM -forces NFM mode.
Limit Search Options
FrLo: Enter the lower frequency of the limit search and press SEL / ENT . See also BandPlan and FlexStep settings (in the ' Expert Settings ' menu) for step
size defaults.
FrHi: Enter the upper frequency of the limit search and press SEL / ENT .
Modulation: Selects the receive mode for the Limit Search object. Auto will work fine unless you want to force a mode. Default is Auto .
Press ◄ or ► to select:
Auto - automatically detects the receive mode.
AM - forces AM mode.
FM - forces FM mode.
NFM -forces NFM mode.
Duplicating Objects
Contents
Duplication is especially useful when entering multiple TGRP objects in the same trunked system or multiple CONV objects that have similar parameters
or tag names.
To Duplicate an Object:
Press MAN . Press ◄ or ► to select the Scan List where the object is located.
Press ▼ or ▲ to locate the object in the scan list.
Press PGM then F2 ( EDIT ) then F1 ( DUPE ).
An exact copy of the object you selected is created and assigned to the Scan List you copied the object from. The scanner then displays the newly created
object menu so you can change the parameters that need to be changed. Edit any parameters you wish and press
F1 ( Save ) when you are finished.
Note: as soon as you press DUPE an object is created and stored. Pressing F1 ( Save ) will only save changed parameters.
Find Menu Find by Lockout Status Find by Text
Finding Objects
There are many different ways to locate objects:
1. By Object Number:
Press MAN , the object number, then SEL / ENT .
To edit the object, press PGM then F2 ( EDIT ) then F2 ( CURR ).
2. By Browsing:
Press MAN . Press ◄ or ► to select the Scan List where the object is located.
Press ▼ or ▲ to locate the object in the scan list.
To edit the object, press PGM then F2 ( EDIT ) then F2 ( CURR ).
Note: Trunking Systems are not assigned to Scan Lists and cannot be found using the ▼ , ◄ , ▲ , or ► keys in Manual or Program Modes. See next
entry to use the Edit Method.
3. By Object Type:
Press PGM then F2 ( EDIT ) then ► until CONV , TGRP , TSYS , SRCH , or STLK/SWPR is over any softkey ( F1 , F2 , or F3 )
Press the softkey under the object type you wish to locate.
Press
◄ or ► to select the Scan List where the object is located.
Press ▼ or ▲ to locate the object in the list.
To edit the object, press F2 ( EDIT ).
4. By Text:
Press PGM then F2 ( EDIT ) then F3 ( FIND ) then F2 ( Text ).
Enter the string of text to find or press F3 ( Qtxt ) to insert any Programmed Quicktext .