Contrast
Press
◄
or
►
to select the best contrast.
Owner
Allows you to edit the welcome screen seen when you turn on the radio.
Press
SEL
/
ENT
to edit.
You are allowed 4 lines of (16 character) text. Press
▼
or
▲
to select each line.
Enter text
or
Qtext
for the selected line.
Press
▼
or
▲
to select another line and enter more text or Qtext.
Press
F1
(
Done
) to save and exit.
Clone Send
You can transfer data to and from any Pro 106/197/651/652/PSR 500/600 using a cable which has a 1/8-inch
stereo
phone plug on both
ends. Both working memory and 'Global Settings' are transferred.
Turn on both radios.
Connect the cable to each scanner's PC/IF jack.
On the sending radio press
PGM
then
GLOB
.
Scroll to '
Clone Send:
' and press
SEL
/
ENT
when you are ready to send to the target radio.
Press
F1
(
Done
) on the sending radio to exit.
The target radio should reboot when finished.
Alert Mode
Controls the alert LED and audible alarm behavior. Default is
Both
.
Press
◄
or
►
to select:
Off
- no alerts.
Both
- uses the Alert LED and Tone.
Tone
- uses the audible alarm only.
Light
- uses the Alert LED only.
Sound Mode
When set to '
On
', allows all radio beeps including
Key Beeps
. Must be '
On
' for
Alert Mode
. Default is
On
.
Press
◄
or
►
to select
On
, or
Stlth
(stealth=off).
Key Beeps
Press
◄
or
►
to select
On
, or
Off
. Default is
On
.
Light Mode
Controls how the backlight operates. Default is
Norml
.
Press
◄
or
►
to select
On
,
Stlth
(stealth=off),
Norml
,
Key
, or
Ignre
.
On
(HH only) - backlight is on when you turn on the radio and stays on.
Stlth
- disables backlight.
Norml
- uses the backlight button on the keypad. Press to turn on for the amount of time set in
Light Secs
.
Key
(HH only) - backlight turns on when
any
key is pressed for the amount of time set in
Light Secs
.
Ignre
(HH only) - backlight turns on when
any
key is pressed for the amount of time set in
Light Secs
and
the key's normal function is ignored for the
first press.
Pressing any key again (when the light is on) will activate its function.
Note:
(HH only) You can still
press and hold
the backlight button until you hear the beep in any mode (except
Stlth
) to keep it on and then press
it to turn it off.
When you power off the radio it will revert to its set mode in the
Light Mode
menu.
Light Area
(HH only)
Controls what is lighted. Default is
Both
.
Press
◄
or
►
to select
Both
,
LCD
, or
Keybd
.
Both
- lights the display and keyboard.
LCD
- lights the display only.
Keybd
- lights the keyboard only.
Light Secs
(HH only)
Controls how long the backlight stays on. Default is
5
.
Enter the amount of time,
1- 99
seconds, the backlight will stay when
Light Mode
is set to
Norml
,
Key
, or
Ignre
.
Light Level
(Base only)
Controls backlight intensity. When
Dim LED
is set to
Yes
, it also controls the Alert LED intensity. Accessed from the front panel
using the
DIM
key. Default is
Brit
.
Press
◄
or
►
to select:
Brit
- lights the display bright.
Dim
- lights the display dim.
Off
- display light is off.
Dim LED (Base only)
When set to
Yes
,
DIM
key and
Light Level
setting also control intensity of alert LED. Default is
Yes
.
Press
◄
or
►
to select
Yes
or
No
.
Battery
(HH only)
Allows you to select which type of batteries you are using. Default is
Alkaline
.
Press
◄
or
►
to select
NiMH
,
Alkaline
, or
NiCad
.
Note:
You must use the yellow battery holder to charge NiMH and NiCad batteries. (External charger is
strongly
recommended).
Do not use the
yellow battery holder with alkaline batteries!
Lo Batt Alert
(HH only)
Controls the
critical
battery audible alert. Default is
30
.
Enter the amount of time,
(0=off) - 60
seconds between alert beeps.
Battery Info (HH only)
Allows you to view the charging status, battery voltage, and DAC value.
Press
SEL
/
ENT
to view.
When the scanner is plugged in
and
charging, will show '
Charge: (and time left)
' if charging.
To reset the timer press
F3
(
Reset
).
To stop charging press
F2
(
Stop
). Will show '
Charger is off
'. To restart press
F3
(
charge
).
Press
F1
(
Done
) to exit.
Charge Time
(HH only)
Allows you to set the battery charge time in hours.
0
= off. The battery charger charges at a current rate of 150 mA. The charger
is disabled when
option is set to
Alkaline
. The default charge time (
99
) will charge 9 hours for Ni-Cd batteries and 16 hours for Ni-MH batteries.
