14
ã
Scania CV AB 2002, Sweden
19:03-15
Installing speaker and
microphone
Note:
For vehicles with radio: Install the
microphone only.
1
Remove the centre panel to facilitate routing
of the cables.
2
Remove the radio panel in the roof shelf.
3
Route the cables for the microphone and
speaker through the roof shelf to the
GPS/GSM module and connect them.
4
Refit the centre panel.
5
Detach the speaker and microphone from
their brackets.
6
Insert the screw through the microphone
bracket. Use a washer between the screw
and the bracket.
7
Fit the radio panel in the roof shelf with the
middle screw.
8
Fit the microphone and speaker brackets at
the same time as the radio panel is screwed
on, see illustration.
9
Press the microphone into its bracket.
10
Fit the speaker into its bracket.
12
55
18
Installation
