19:03-15
ã
Scania CV AB 2002, Sweden
13
16
Connect the cables to the GPS/GSM
module.
Note:
Make sure the wiring in the roof shelf is
slightly slack.
17
Connect E38A to the voltage converter
wiring. Connect E38B to the voltage
converter, the voltage cable between the
voltage divider and the GPS/GSM module.
Note:
If pin 12 on the voltage divider is free
then cable C3-15 must be connected there.
Otherwise, connect the cable together with the
existing cable on pin 15 in connector C3.
18
On vehicles with original radio:
A) Disconnect the speaker connector from
the radio.
B) Connect the mute box cable for the radio
speaker to the speaker connector C493/E33.
C) Then connect the mute box cable E33-B
and the mute cable E33-A2 to the radio.
D) Fasten the mute box with double-sided
adhesive tape to the bottom of the shelf
behind the radio.
E) Connect the mute box connector C492 to
the FAS wiring.
19
For vehicles without radio or mute box:
Do not use the mute box. Install the speaker
as follows instead.
12
55
21
Installation
