2. Place a suitable pan on the cooking zone that
you wish to use.
•
Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone slider control ,
and a indicator next to the key will flash
4. Ajust heat setting by touching the the
slider control.
• If you don’t choose a heat
ing zone setting within
1 minute, the Induction hob will
automatically switch off. You will need to
start again at step 1.
•
You can modify the heat setting at any time
during cooking.
If the display flashes
alternately with the heat setting
•
you have not placed a pan on the correct cooking zone or,
•
the pa
n you’re using is not suitable for in
duction cooking or,
•
the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is
placed on it.
3.3.2 Finish cooking
1. Touching the heating zone slider
control that you wish to switch off
41