1.2.
Installation
1.2.1.
Installation requirements
•
For easier maintenance, operation, and improved ventilation, be sure to install
away from adjacent structures and other equipment.
•
Be sure that the surrounding air temperature and the ambient humidity are within their des
(Surrounding air temperature: 0 to 50°C, Ambient humidity: 10 to 90%RH, Wet bulb temperature: 39°C max.) When
installing eNodTouch on the panel of a cabinet or enclosure,
face and cabinet or enclosure’s internal
1.2.2.
eNodTouch installation
X
Y
105.0
[4.13]
66.0
[2.60
•
Cut a hole in the panel according to the
•
Confirm that the installation gasket is attached
•
It is strongly recommended that you use the installation
•
Press the installation fastener hooks securely
•
Tighten the installation fasteners with a screwdriver. There are two insertion slots on both the
4
User manual SCAIME:
NU-eNodTouch-E-0413
Installation requirements
For easier maintenance, operation, and improved ventilation, be sure to install eNodTouch
away from adjacent structures and other equipment.
Be sure that the surrounding air temperature and the ambient humidity are within their des
(Surrounding air temperature: 0 to 50°C, Ambient humidity: 10 to 90%RH, Wet bulb temperature: 39°C max.) When
on the panel of a cabinet or enclosure, “Surrounding air temperature” indicates both the
et or enclosure’s internal temperature.
eNodTouch installation
Panel thickness
eNodTouch has two projections
on the top to prevent falling
during installation. Please insert
the unit into the panel at an
angle to avoid hitting the
projections.
66.0
[2.60]
1.0 [0.04]
To 5.0 [0.20]
Cut a hole in the panel according to the eNodtouch cutout dimensions.
Confirm that the installation gasket is attached to eNodTouch unit and then place the unit into
d that you use the installation gasket, since it absorbs vibration in addition
Press the installation fastener hooks securely into the insertion slots on eNodTouch.
Tighten the installation fasteners with a screwdriver. There are two insertion slots on both the
eNodTouch at least 100mm [3.94in.]
Be sure that the surrounding air temperature and the ambient humidity are within their designated ranges.
(Surrounding air temperature: 0 to 50°C, Ambient humidity: 10 to 90%RH, Wet bulb temperature: 39°C max.) When
“Surrounding air temperature” indicates both the panel
has two projections
on the top to prevent falling
during installation. Please insert
the unit into the panel at an
angle to avoid hitting the
projections.
the unit into the Panel from the front.
t absorbs vibration in addition to repelling water.
Tighten the installation fasteners with a screwdriver. There are two insertion slots on both the top and bottom.
