3.2.4.
Keyboard functions
eNod4
model
Keyboard
touch
Action
Main Keyboard
All
ZERO function : possible only under stability condition, according to stability criterion
TARE function : possible only under stability condition, according to stability criterion
PRESET TARE function
CANCEL TARE function
Shift to 2
Enter to Setup menu
2
nd
Keyboard
All
Access to thresholds adjustment
eNod4-C
DYNAMIC ZERO function : Zero calculation (measurement averaging) without stability
condition
eNod4-D
START
dosing cycle is ongoing.
STOP DOSING : Stop the dosing cycle, the dosing
SUSPEND DOSING: Visible only if dosing
suspended dosing cycle without checking starting conditions
MANUAL EMPTYING: Visible only in filling mode with Manual Emptying mode. Allows to
activate the emptying logical output during the emptying
Access to Dosing target adjustment screen
3.3.
Result displaying and storage
•
The Result screen can be displayed from the main screen with
•
The Result screen shows information related to the result of checkweighing
Last result value and statistics (Number of cycle, Result standard deviation and result average).
•
From this screen, it is also possible to control a recorder to memorize up to 1000 results with the possibility to
these stored results on USB key in .CSV format.
Recorder stopped Recorder running
Important note about the recorder:
•
When the recorder is running, only the main screen and the result
•
As a consequence, some touch keys giving access to other screens are no longe
menu). To make these buttons visible again, st
Clear
statistics
11
User manual SCAIME:
NU-eNodTouch-E-0413
Action
ZERO function : possible only under stability condition, according to stability criterion
TARE function : possible only under stability condition, according to stability criterion
PRESET TARE function
CANCEL TARE function
Shift to 2
nd
keyboard
Enter to Setup menu
Access to thresholds adjustment screen
DYNAMIC ZERO function : Zero calculation (measurement averaging) without stability
condition
START DOSING: Start the dosing cycle if starting conditions are satisfied
dosing cycle is ongoing.
STOP DOSING : Stop the dosing cycle, the dosing counter is not incremented
SUSPEND DOSING: Visible only if dosing suspension setting is enabled. Allow to restart a
suspended dosing cycle without checking starting conditions
MANUAL EMPTYING: Visible only in filling mode with Manual Emptying mode. Allows to
activate the emptying logical output during the emptying phase
Access to Dosing target adjustment screen
displaying and storage (eNod4-C, eNod4-D)
The Result screen can be displayed from the main screen with
touch.
The Result screen shows information related to the result of checkweighing cycle (eNod4
Last result value and statistics (Number of cycle, Result standard deviation and result average).
From this screen, it is also possible to control a recorder to memorize up to 1000 results with the possibility to
these stored results on USB key in .CSV format.
Recorder stopped Recorder running
, only the main screen and the result screen are accessible to enable this recording
keys giving access to other screens are no longer visible (eg. Access touch to
menu). To make these buttons visible again, stop the results recorder.
ZERO function : possible only under stability condition, according to stability criterion
TARE function : possible only under stability condition, according to stability criterion
DYNAMIC ZERO function : Zero calculation (measurement averaging) without stability
Start the dosing cycle if starting conditions are satisfied. Invisible if
counter is not incremented
suspension setting is enabled. Allow to restart a
suspended dosing cycle without checking starting conditions
MANUAL EMPTYING: Visible only in filling mode with Manual Emptying mode. Allows to
phase
cycle (eNod4-C) or Dosing cycle (eNod4-D):
Last result value and statistics (Number of cycle, Result standard deviation and result average).
From this screen, it is also possible to control a recorder to memorize up to 1000 results with the possibility to transfer
accessible to enable this recording.
r visible (eg. Access touch to settings
Recorder
control and
indicators
