Document
9911004rev27
Title
Date
2017-02-16
Page
50(81)
SBS MicroSMART Battery Charger Technical Handbook
4.
Set the field
Function
to
Enabled
by putting the marker on the field
Function
and press
OK
. The following menu is shown. Press
OK
to log in.
5.
Press
OK
and enter the correct Access level 1 or 2 PIN-code using arrow up, down, left
and right. Press
OK
when all the four digits of the PIN-code are entered. Note that your
level 2 PIN-code will work both when level 1 or level 2 access is required.
6.
The original
Radio
window is shown again. Change
Function
to
Enabled
by marking the
field
Function
, press
OK
and change the option by using the up or down arrow. Press
OK
to confirm.
7.
If the network settings are set to
User def
you will only search for a network with the
channel number and PAN-ID specified in
Network settings.
To avoid this enter the field
Network settings
and make sure the field
Settings
is set to
Auto
, as shown in this
picture. Press
ESC
to return to the
Radio
window.
8.
Put the marker on the field
Join network
and press
OK.
There are a number of reasons
to why a device might not be able to join the network. See
Join network
under
Radio
for more information. The following menu is shown when the device is searching for a
radio network within hearing distance.
