Hardware Manual PCD1.M2110R1 │ Document 27-619 │ Version ENG 04 │ 2018-08-20
Saia-Burgess Controls AG
Firmware Version for the PCD1.M2_ (COSinus update)
CPU / Control Process Unit
3-4
3
3.4
Firmware Version for the PCD1.M2_ (COSinus update)
The firmware of the PCD1 is stored on a flash memory, which is soldered to the
mother board. A firmware update can be applied by downloading a new version
with the Saia PG5
®
. To do so, proceed as follows:
●
Open
www.sbc-support.com
and download the latest firmware version
●
Establish a connection between Saia PG5
®
and the CPU, the same way as
when downloading an application (in accordance with the available devices,
serial with PGU cable, modem, USB, Ethernet)
A modem connection is never permitted. Modems can block, so that
remote access is no longer possible. In these cases, it is necessary to
visit the system in person. Other connection options are preferred.
● Open the online configurator and go offline
●
In the Tools menu, select “Update Firmware” and use the Browse function
to select the path for the file with the new firmware version. Make sure that only
one file is selected for download
●
Start the download
●
After the download, the power supply of the PCD1 may not be interrupted
for 2 minutes. (CPLD programming sequence). Otherwise, there is the risk
that the CPU locking, in which case it must be sent back to the manufacturer.
The download process is concluded with the restarting of the PCD.
The firmware of the PCD1.M2_ is secured on a flash memory on the mother
-
board.
