Instruction leaflet
shieldLED 400 Recessed
52183, 52184, 52185, 61062
www.saxbylighting.com
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
Saxby Lighting Ltd. BH23 3PE
• We recommend cleaning with a soft dry cloth. Do
not use solvents or abrasive cleaners as these could
damage the finish.
• Glass parts – Wipe with a damp cloth. Do not use
abrasive materials as these will damage the finish.
• The LED's in this product are non replaceable
Fitting/replacing bulbs
Iss.5 05082015
Check that...
•
You have correctly identified the wires.
• The connections are tight.
•
No loose strands have been left out of the connection
block.
• That the cover over the mains terminals has been
replaced.
• Connect the fitting to the LED driver.
• The ceiling surface must be flat and smooth to ensure
a good fit.
• Ensure that the LED driver is sitting away from the
unit and has good ventilation.
• Push the spring clips upwards and fit into the ceiling
hole, then push the unit up until firmly in position,
ensuring that no cables are trapped.
• Ensure that the product is sitting properly in the hole.
• Ensure all rubber seals are correctly in place.
• Replace fuse or circuit breaker and switch on. Your
light is now ready for use.
Commissioning
