ENGLISH
19
Temperature sensor 1 is not connected.
Temperature sensor 1 is short circuit.
Temperature fuse is defective.
Temperature sensor 2 is not connected.
Temperature sensor 2 is short circuit.
Combined Temperature / Humidity sensor is defective.
Communication failure or main board is turned off while
contactor is powered by rocker switch.
Temperature is greater than the maximum temperature.
Safety Switch open or Door sensor open.
Power controller overheat.
E1
E2
E3
E4
E5
E6
E7
E8
E9
E10
0
0
0
0
0
0
0
1
1
1
0
0
0
1
1
1
1
0
0
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
ERROR
Description
LED 1 LED 2 LED 3 LED 4
4 LEDs in the power controller identifies errors.
If E9 occurs, LED screen displays “oPEn” while the LED error indicator on the power
controller will blink the E9 code.
Description
Power Rating
Remarks
Rated Power 3 Phases
Rated Voltage 3 Phases
Rated Power Single Phase
Rated Voltage Single Phase
Frequency
Switching capacity per phase
Sauna temperature range
Maximum session time
(preset)
Dimensions SAUNOVA 2.0 S types
User Interface
Power Controller
Weight SAUNOVA 2.0 S types
User Interface
Power Controller
Weight SAUNOVA 2.0 B types
9kW AC1
(3 x 3kW)
400V 3N~
9kW AC1
230V 1N~
50/60Hz
16A
30-110°C
1, 2, 4, 6, 8, 12,
18, 24h
(W) 104 x (H) 147
x (D) 37
(W) 265 x (H) 245
x (D) 75
350g
1150g
-
Restrictions
apply according
to IEC/EN
60335-2-53
Control
Rated Power 3 Phases
Rated Power Single Phase
Rated Voltage
Switching capacity
Maximum sauna temperature
for steamer operation
Automatic water filling
Rating
Rating
3kW AC1
3kW AC1
230V 1N~
16A (3 Phases),
16A (1 Phase)
80°C or *55°C
230V 1N~,
100W AC1
230V 1N~, 0.5A
Optional
Description
Power Rating
Remarks
Steamer
* Depending
on the type of
Sensor 2.
Min 20W, max
100W.
Fan without
starting capacitor.
Cabin Light
Fan
Fuse
Fuse F1
Fuse F2
Fuse F3
(160mA) is fuse for electronics
(1A slow) is fuse for cabin light
(500mA slow) is fuse for fan and
automatic refilling combi.
