26
The control unit switch can be found on the top end of
the unit. Using this switch, you can isolate the
electronics from the mains power supply.
In order to put the unit into operation, switch to the
first position (switch position I). In this switch position
all control unit’s functions work normally.
In case of breakdown, press the control unit switch on
the left part of the rocker to the middle position (switch
position 0). The unit is now completely switched off.
In order to switch on the light in the sauna when the
unit is switched off, press on the left part of the rocker
to the second position (switch position II).
4.10 The Control Unit Main Switch
0
OFF
=
=
=
LIGHT ON
UNIT ON
0
II
I
II
I
Refer to Technical Diagram
Power Controller
Push the hole with
hard object to open
4.
5.
161mm
25mm
85mm
2.
3.
Touch Control
Push to open
Unscrew
Unscrew
