13
English
2.5 Changing the settings
Heater ON/OFF
OFF mode
Lights ON/OFF
Easy mode
Settings
Timer
Current week day and time
2.
1.
3.
4.
5.
6.
7.
From OFF mode you can access to settings, timer, Easy mode and turn on lights and
heater
Long press settings button for 5 seconds to access settings menu. In settings menu you can navigate between settings by
using arrows Right and Left, and change the displayed setting by using arrows Up and Down unless mentioned otherwise
below. After changes are done confirm them by navigating to Save&Exit screen and press SAVE. If you want to discard all
changes press ESC.
Pressing the weekday, hours or minutes button you can set the
correct time and day. In case of electricity blackout the day and
time keep runnin and there is no need to set them again.
Check what is the power of your heater and adjust the value
on screen accordingly in kilowatts.
When auto cabin light is activated, the lights will turn on
automatically when the heater is turned on. If this function is
disabled you can use the cabin light manually.
Auto fan feature is for drying your sauna room after sauna
session. You can adust the desired exhaust fan time. Fan will
turn on automatically after sauna session has ended.
You can adjust the LCD contrast.
Active balckout memory restores control to its previous state before power failure.
For example, if heater was on before power failure, the heater will automatically
continue from the previous state.
You may set the temperature scale either Celsius or Fahrenheit.
