After pressing ON button you will go to adjust
timer settings. Days that have “ ” indicator
have an active timer. By long pressing that days
icon for 3 seconds you can cancel all active
timers from that particular day. By pressing on
any of the week days you can adjust the timer
settings of that day.
Press the timers to change selected field.
Timers that have “ ” indicator are currently
active. Activate/inactivate timer by pressing the
-button
Press the hammer icon to change settings of
the selected timer. By pressing ESC button you
can cancel any changes and return to OFF
mode.
English
11
2.4.4 Pre-run timer for public saunas with weekly timer
EACH DAY HAS
THREE TIMERS
CHECK MARK TELLS YOU
WHICH DAYS HAVE ACTIVE
TIMERS AT THE MOMENT
“ ” = ACTIVE TIMER
PRESS TO CHANGE
SELECTED FIELD
CONFIRM CHANGES
AND RETURN TO
OFF-STATE
ADJUST VALUES
WITH ARROWS
OK BUTTON CONFIRMS
CHANGES AND
RETURNS TO DAY
VIEW
ACTIVATE/DEACTIVATE
SELECTED TIMER
TIMERS CAN NOT BE SET
TO OVERLAP WITH EACH
OTHER
Timer
When small timer icon
is visible, there is active
timers at the moment
OFF-mode
NOTE
OK BUTTON CONFIRMS
CHANGES AND RETURNS
BACK TO WEEKLY
VIEW
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Press timer icon to set timers
Then you can continue to adjust timer settings by
pressing OK. If you want to retunr back to OFF mode
and turn off all timers press OFF button.
Weekly timer is only available if max session time
setting has adjusted to be 12 hours or more(page
22). If max on time has been set to 12 hours,
automatic restart can only happen after 6 hours of
the previous automatic start(IEC 6-335-253).
Before setting any preset timers, make
sure that current day and time are
correct from the settings menu(2.5).
MOVE BACK
TO OFF-STATE
CHANGE SELECTED
FIELD
MODIFY SELECTED TIMER BY
PRESSING THE HAMMER ICON
