Sawn Craft Micro F-22, Руководство по сборке и настройке

Страница: 5 / 18

Sawn Craft Micro F-22 Manual
Page 2 1311101 Micro F-22 Manual.docx
Sawn Craft recommends the use of Beacon Foam-Tac adhesive and 3M Blenderm Hinge Tape for the
construction of this model due to its strength, light weight, and easy use. Both Blenderm and Foam-
Tac can be purchased by visiting the
Building Supplies tab on Sawn-Craft.com
1.3 Required Parts for Completion
This model was designed with the intention of putting to use the electronics that are used in today’s
popular 1S LiPo-powered Ultra-Micro aircraft. Once you have worn out the airframe on your
Hobbyzone© Champ or Parkzone© UM P-51 Mustang, simply remove the electronics and use them to
power this model. If you choose to purchase your power system components separately, Sawn Craft
does offer the
Micro Electronics Kit that includes every part of the power system that you need. The list
below contains all of the required and recommended parts for the successful operation of this model.

1S LiPo “Brick”

Ultra-Micro Motor and Gearbox

Propeller

1S LiPo Battery
Please note that other power systems and components may be compatible and may work without
issue, but the listed components have been used successfully by Sawn Craft.
Optional Parts for Completion
To make your build easier and ensure the nicest looking finished product, the following products are
offered on
Sawn Craft.com . See the Building Supplies tab for these products.

6” 1S Battery Lead Extension

5” Micro Motor Lead Extension

Colored Packing Tape