Sawn Craft Micro F-22 Manual
Page 6
1311101 Micro F-22 Manual.docx
2.3 Elevator/Elevon & Rudder Hinging
Parts Required:
o
Elevator
o
Vertical Stabilizer (2 each)
o
Micro Control Horn (4 each)
o
Main Wing
or
o
Elevon (2 each)
o
Micro Control horn (2 each)
o
Main Wing
Elevator/Rudder Setup
Warning:
This process involves using extremely sharp cutting blades. Care must be taken to avoid injury.
1)
Lay the elevator on the table with the leading edge facing yourself and the control horn slot to the
left. Use a straight edge ruler and a hobby knife or a sanding block to cut an approximate 45° bevel
into the leading edge of the control surface. Set elevator aside.
