Sawn Craft Micro F-22 Manual
Page 8
1311101 Micro F-22 Manual.docx
5)
Place the vertical stabilizers and rudders back together with trailing and leading edges touching,
oriented the proper direction for the bevels to face away from each other when installed. Cut
approx. ¼” x 1” pieces of hinge tape. Use two of these small pieces of tape to attach the smooth
sides of the rudder and vertical stab together. Flip the assemblies over and install two additional
pieces of tape on the bevel side of the hinge to complete the tape hinge. Dry fit a micro control
horn into each slot, ensuring that the hinge bevel is facing down. Set assemblies aside.
6)
Place the elevator and main wing together with trailing and leading edges touching, oriented such
that the hinge bevel faces down when the KFm Step is facing up. Use three small pieces of tape to
attach the smooth sides of the elevator and main wing together. Flip the assemblies over and
install three additional pieces of tape on the bevel side of the hinge to complete the tape hinge.
Tape hinge
