8
Figure 16
12. INSTALLING THE LED
LIGHT BULBS AND
GLASS SHADE
1. Install 1x 7W LED bulb (included).
2. Install the glass shade to the light kit
assembly with 3 screws provided. (Fig. 16)
3. Restore power and your light kit is ready
for operation.
Figure 15
11. INSTALLING
THE LIGHT KIT
ASSEMBLY
NOTE:
Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box.
Step 1. Remove the 3 screws from the
mounting plate.
Step 2. While holding the Light kit assembly
under your fan, snap together the wire
connection plug. (Fig. 15)
Step 3. Install the Light kit assembly onto the
mountimg plate with 3 screws provided. Be
sure to tighten all screws. (Fig. 15)
Mounting plate
Wire connectors
Light kit
assembly
Light kit
assembly
Srews
Bulb
Screws
Glass shade
