11
Figure 22
Figure 23
Figure 24
13. OPERATING
INSTRUCTIONS
Restore power to ceiling fan and test for
proper operation.
A.
HI, MED
, and
LOW
buttons:
These three buttons are used to set
the fan speed as follows:
HI
= high speed
Med
= medium speed
Low
= low speed
B.
FAN OFF
button:
This button turns the fan off.
C.
LIGHT
button:
This button controls the light. Press
and release the button to turn the
light ON or OFF. Press and hold the
button to set the desired brightness.
The light key has an auto-resume, it
will stay at the same brightness as
the last time it was turned off.
D.
"OFF-ON "
Slide Button:
This button turns the power Off and
On to the Fan and Light(s).
The Reverse switch is located on the top of
the motor housing. Slide the switch to the
Left for warm weather operation. Slide the
switch to the Right for cool weather operation.
Speed settings for warm or cool weather
depend on factors such as the room size.
Ceiling height, number of fans and so on.
NOTE:
Wait for fan to stop before
changing the setting of the slide switch.
Warm weather - (Forward) A downward
airflow creates a cooling effect as shown
in Fig. 23. This allows you to set your
air conditioner on a warmer setting
without affecting your comfort.
Cool weather - (Reverse) An upward
airflow moves warm air off the ceiling
area as shown in Fig. 24. This allows you
to set your heating unit on a cooler
setting without affecting your comfort.
