Sav SAV 531.42, Руководство по эксплуатации

Страница: 105 / 112

EN
9 TROUBLESHOOTING
9. TROUBLESHOOTING
The safety information from the section 2 “Safety must be observed.
DANGER!
Hazard from malfunction!
Incorrect troubleshooting and installation of the lifting magnet can cause a
malfunction of the magnet.
Loads can fall down and cause serious injuries and even death.
■
Have troubleshooting carried out only by qualified personnel.
■
The lifting magnet has to be set down securely or attached to the load.
Check after troubleshooting and installation!
■
If it is not possible to restore the function of the lifting magnet on your
own, the lifting magnet must be taken out of service. Contact customer
service at SAV GmbH and provide a description of the malfunction.
DANGER!
Risk of crushing!
There is a risk of crushing limbs from tipping over or falling of the lifting
magnet due to incorrect installation and removal of the magnetic magnets.
■
Secure the lifting magnet against falling or tipping over.
■
To lift the lifting magnets, always use safety hooks that are designed for
the weight of the lifting magnets, so that the lifting eye cannot slip from
the hook.
■
Have troubleshooting carried out only by qualified personnel.
Potential causes for the malfunctions and recommended remedial measures:
Description of the fault/mal-
function
Possible causes of the
fault/malfunction
Possible remedial measures To be carried out by
Corrosion of the functional
surface Ambient humidity Remove corrosion. Preserve surfaces
before storage. Operator
Corrosion on the lifting eye Abrasion Remove corrosion. Apply protective
coating. Maintenance engineer,
mechanic
Minor damage to the function-
al surface (dents, scratches) Dirt between the load and
the functional surface Always clean the
contact surface
before attaching
the lifting magnet. Sweep a grinding
stone across it.
Repair larger
notches with a
file. Operator
Impact, fall Avoid rough
actions.
Severely damaged or worn
contact surfaces on more than
10 % of the area Dirt, impact, fall Mill across the functional surfaces. Maintenance engineer,
specialist mechanic
Damage to the lifting eye Impact, pressing on.
Excessive wear on the eye
cross-section on more than
10 % Replace the damaged lifting eye. Maintenance engineer,
mechanic
Damage to the load-bearing
components Impact, fall, pressing-on Take the lifting magnet out of service
and contact customer service at SAV
GmbH. Maintenance engineer,
specialist mechanic
SAV 531.42
Version 1.0
[
105
]