Saunier Duval 2-035 AK, Руководство по установке, Страница: 80 / 144

ENG
8
4
- INSTA
LL
ATION OF THE
U
NIT
4
.2.2- Mountin
g
t
h
e cassette
w
it
h
out
f
alse ceilin
g
The necessary installation measures can be
consulted in section 4.
1 Draw the positioning of the securing points
according to the measurements indicated and
then mount the fasteners in the designated
place.
2 Adapt the length of the fasteners to the
required measurements. (Diameter of the ring
rod M 10).
3
Secure each support with a fastening nut and a
locknut below the angle of the cassette support
and a fastening nut above the support angle.
4
Hitch up the cassette without tightening the
locknuts.
5 Adjust the cassette by adjusting the lower
fastening nuts mounted on ring rods / on the
ring hooks, ensuring the cassette is horizontal
and the height is correct.
6
Then, tighten the fastening nut and the
locknut.
4
.2.3- Mountin
g
t
h
e cassette
w
it
h f
alse ceilin
g
The necessary installation measures can be
consulted in section 4. Open the false ceiling to
the measurements indicated for the cassette.
1 Draw the positioning of the securing points
according to the measurements indicated and
then mount the fasteners in the designated
place.
2 Adapt the length of the fasteners to the
required measurements. (Diameter of the ring
rod M 10).
3
Secure each support with a fastening nut and a
locknut below the angle of the cassette support
and a fastening nut above the support angle.
4
Lift the cassette, leaning it slightly, where
necessary, to insert it into the opening in the
false ceiling.
5
Hitch up the cassette without tightening the
locknuts.
6
Adjust the cassette by adjusting the lower
fastening nuts mounted on ring rods / on the
ring hooks, ensuring the cassette is horizontal
and the height is correct.
T-bar
Bar
Support
Body
Hook
Nut
Ceiling
Panel
H (C
ei
lin
g h
ei
gh
t)