18
Committed
In case of using 2 or 4 LNB input DiSEqC box
Uncommitted
In case of using 16 LNB input DiSEqC box
Repeat
If your DiSEqC box doesn’t work properly, increase
Repeat value and try again
Tuner
Lock
FEC
1/2,2/3,3/4,5/6 or 7/8
Level
over 30%
Qual.
over 10%
6-3. Mortor Setup (DiSEqC 1.2)
If you are using DiSEqC1.2 positioner motor, You need to position your
antenna correctly for reception of the best signal.
Connect your DiSEqC motor and the Receiver with proper cable.
Press
Green
button on the
LNB configuration
mode.
Select a satellite you want with
or
.
Press
to move to TP section and select any TP you want with or .
DiSEqC 1.2 Positioner Setting.
- Motor/Goto 0
Determine the kind of Motor & whether or not controlling it by using or .
On
Using DiSEqC Motor.
Off
Not using DiSEqC Motor.
STAB
Using the specific Motor supplied by Stab company.
If you press
, DiSEqc Motor will move toward Zero Equator.
- Move / Save :
Select West/East direction with or .
-
Set Limit :
of your antenna movement to east/west direction and press
.
to protect your antenna from any possible collision between your
antenna and certain obstacles nearby it.
-
My longitude / My latitude
You can use this item when STAB is set on 'Motor/Goto 0'. Determine your
longitude & latitude at present. 'East/West' is changed by using or .
19
6-4. Satellite Scan
After finishing
Motor Setup
or
LNB configuration
, you can do channel
search.
Press
Yellow
button, or Select
Scan
with
or
, and press
.
Pressing
RED
button
.
Then
Satellite Scan
mode will be pop-up.
Screen
Select
Free only
or
Free+Scrambled
in the
Option
with or .
Move the cursor to
satellite
with
and select the satellite you want
to scan with or .
Press
, and then the channels of selected satellite(s) will be scanned.
After the scanning process, the first channel of the last scanned TP will be
displayed on the back screen.
Press
to finish the process and select a channel.
Press
to watch a program, or press
MENU
or
EXIT
button.
Note : Now, you have completed all steps needed for watching
programs. If you could not see the program after finishing
these procedures, please contact your engineer or
representative
.
7. Channel Edit
After satellite scan, you may need to edit the TV or Radio channels as your
pleasure. In this mode of
TV Ch.List
, by pressing
CH.LIST
button simply, you
can find channels you want to watch and you can edit searched channels at
your disposal. This mode consist of
Channel-Sorting
,
Channel-Editing,
Favorite Mode.
