background image

 

 

 
 

2-2  Precaution 

 

When installing the unit ······································································ 

The socket-oulet shall be installed near the equipment and shall be easily 
accessible. 

Install the unit horizontally, An 
uneven installation may cause 
the unit be damaged.

 

Do not put heavy items such 
as a TV on the unit. That may 
cause the unit to be 
damaged.

 

Do not install the unit. 

 Where it is subject to vibrations. 

 

Where it is exposed to direct 

sunlight. 

 

Where there is humidity. 

 

Where the temperature is too 

high or too low. 

 

Where there is no ventilation.

 

Moving the unit to a hot area 
from a cold one will cause 
condensation. 
Do not operate the unit for one 
or two hours or until it has dried 
completely.

 

 

 

3. Check Points before Use 

 
 
 

3-1. Accessories 

 

Accessories of this are as below ·····················································

 

 

     

 

 

     

 

 

3-2  The Satellite Dish 

 
Your dish should be properly installed. 
Azimuth and elevation must be precisely set up. 
 

This unit is working with DiSEqC 1.2 on a compatible antenna positioner. 
Ask your dealer for information. 

 

Содержание DSR-500


















Отзывы: