16
8) Screen
P/S
When you set screen display boundary from Pan/Scan
data of Satellite input signal.(For signal for 16×9
program)
L.Box
You can watch 16×9 ratio screen by reducing original size
vertically and horizontally.
9) DL Saving(Summer Time)
Yes
Set for daylight saving function activated
The current time automatically moves one hour ahead
No
Set for daylight saving function deactivated
Note : Without current local time setting, this menu cannot be
processed.
10) RF Type :
NTSC,PAL-G,PAL-I,PAL-K
11) RF Channel :
you can set proper RF channel
6. Installation – Automatic Channel Search
Now, Let’s start channel search and store the searched channels in the
Receiver. Since the receiver has the basic data of most satellites and
channels, you can receive programs just by plugging in. But, according to the
status of your antenna setup, you may have to modify the basic data of
preprogramed satellites and /or channels.
6-1. Satellite Collection
As the first step, you have to select your preferred Satellites among pre-
programmed Satellite list.
Press
MENU
button and Select
Install
→
Satellite
Collection
and press
.
Enter 4-digit password. (
The default password is ‘0000’)
Locate the cursor to the satellite you want to add with
or
and
press or for selection, and then press
after confirmation
message.
17
screen
Note : To delete any satellite you added, press
or
again.
When necessary, you can change a satellite name as you
wish. press
then the cursor will move to the selected
satellite in the right section. You can enter alphabetic
characters with numeric buttons of your RCU.
6-2. LNB Configuration
You can set LNB by pressing
Green
button directly or selecting
LNB
Configuration
in the main menu.
Press
Green
button at the
Satellite Collection
mode to enter the
LNB
Configuration
mode.
Select Satellite that need to be changed or reset its values and press
,
the cursor will move to right section.
Select item to be edited with
or
and change its parameters.
- LNB Type : Select the proper LNB type of the Satellite with or .
- High L.O. / Low L.O. : Enter LNB oscillator frequency with numeric
buttons.
- Power : Set LNB power ON or OFF with or .
- 0/22KHz : Set the path of 0/22KHz switch box with or .
- Angle : Enter satellite angle with numeric keys.
- DiSEqC : Press
and Set the path of DiSEqC box with or . and
Press
Exit
button.
