28
Screen
Select any Satellite first you want to edit its TP and press
, Then the
cursor will move to right section.
Select
TP Frequency
and select the
TP
value you want to edit with or .
►
If you want to add a new TP, enter the TP frequency with numeric
buttons after pressing
.
►
If you want to modify a specific TP, move to the TP with or and
enter new frequency with numeric buttons.
Move to
Polarization
with
and the set the proper value.
Move to
Symbol Rate
with
and enter the proper symbol rate value.
Move to
TP Edit
with
and select
Add
if you want to add, or select
Modify
if you want to modify with or .
If you want to scan channels of the edited TP, Refer to 9.3 Manual TP Scan.
9-2. TP Delete
Do the same procedure as above
→
.
Move to
TP Edit
with
, and select
Delete
with or , and Press
.
9-3. Manual TP Scan
You can Scan only 1 TP of a certain satellite.
After proceeding above TP Edit, move to
Option
and select
FTA
only
or
FTA+CI
Move to
Scan
with
and press
. As a result, you can get the
following message. If you want to stop scanning, press
EXIT
29
Screen
After scanning process, the first channel of scanned
TP
will be displayed.
Note : You can also do manual TP Scan without TP edit. Select
any TP of any satellite you want to scan and follow above
process.
10. EPG (Electronic Program Guide)
You can check the channel and Program information on the channels.
This Receiver supports current/Next and program schedule information of a
certain channel and extended information of programs.
10-1. Current / Next Information
Press
GUIDE
button, then
Program Guide
menu will be displayed.
Note : 1. If you didn't set local time under ‘System Parameters’
section, the GUIDE function may not work properly.
2. EPG information is delivered by satellite from service
providers. If the channel does not carry any signal on
the guide data, this function may not work properly.
Select
Channel
with
or
.
Then you can see current or next program information of the selected
channel.
Press
GREEN
button, then current or next program information will be
converted to next or current program information respectively.
