SATO 8191-00, Инструкция по эксплуатации, Страница: 3 / 28

2
Overview
This temperature datalogger uses K-type thermocouple sensor. Four probes can be connected at the same
time, and four channels can be displayed on the large LCD.
An SD card is used as the recording medium.
Features
● Measure the temperatures of four locations at same time.
Up to four K-type thermocouple probes can be connected. Simultaneously displays four temperatures from
four locations (channels) on the large LCD for easy reading. By using the ASTM (former ANSI) miniature
connector for the K-type thermocouple, various optional sensors can be connected.
● Logging the measured values on the SD card
The measured values can be logged on the SD card installed in the unit.
By using the analysis software "4ch DATALOGGER for Windows" included with the unit, graph plotting
and data analysis can be easily done.
● Manual logging, preset logging, memo function
Equipped with manual logging, preset logging that enables you to set the time at which to start or stop
logging, and a memo function for quickly logging the current measured value. Can be used for various
data collection operations.
● Alarm issuance at upper and lower limit temperatures
Different alarm values (upper and lower) can be set for the four channels. If the measured value goes out
of the set limit value, a buzzer sounds and the LED lamp flashes to alert.
● Display of various calculation results
Display of the maximum (MAX) or minimum (MIN) value, relative value (REL function), temperature
difference (T1 – T2 function), offset function.
● Backlight function: The backlight makes it easy to read in dark places.
● Mounting on a tripod
The threaded hole on the back of the unit makes it easy to mount the unit on a tripod.
Before use
Check whether the unit was damaged during shipping.
If it is damaged, contact us or the store where you purchased the unit.