SATO 8191-00, Инструкция по эксплуатации, Страница: 10 / 28

9
The file name is created using the date and time the measurement starts.
File name structure: [ AA BB CC DD .ska]
Month Date Hour Minute
Example: Sep. 11, 10:15
File name: [09111015.ska]
・
Up to 30,000 data items (for each channel) are stored in a file.
When there are more than 30,000 data items, a new file is created to continue logging.
This new file is named using the date and time it is created.
・
If the
SD
character is off, or if the
FULL
character or the low battery indicator is on, it is not possible to
start logging or to set the preset logging.
Note: The logging continues until the battery is exhausted even if the low battery indicator lights up
during logging. If this occurs, immediately replace the batteries. If continue logging is required,
switch to the power supply from the AC adapter.
・
If you start logging when any of the functions MAX/MIN, HOLD, T1 – T2, or REL has been activated,
logging is performed upon cancelling each function. These functions are disabled during logging.
If the offset value has been set, the values reflecting the offset value are logged.
・ The display of measured values can be turned on or off during logging.
Use the [MAX/MIN/ ▲ ] key to turn the measured value display on or off.
* Note that displaying the measured values consumes a lot of power and shortens the battery life.
The display of measured values should be turned off unless necessary.
・
It is not possible to turn off the power during logging. The auto power-off function is disabled during
logging. To turn off the power, first stop logging, and then turn it off.
2. Manual logging
The logging starts when the key is pressed and continues at the logging interval that has been set.
1) Setting the logging interval
Set the logging interval by referring to "Setting the logging interval" on page 14.