SATO 8191-00, Инструкция по эксплуатации, Страница: 13 / 28

12
2) To stop logging, release the [MEMO] key. The character goes off to indicate that the
measurement mode is resumed.
Note: The auto power-off function is enabled during the continuous data memo function.
If the continuous data memo function is going to be used for 20 minutes or more, cancel the
auto power-off function, by referring to "Auto power-off function" on page 18, before starting
the memo function.
Various settings
The following settings can be made in the setting mode.
No. Character Description
Sets the logging conditions.
Sets the alarm function.
Sets an offset to the measured values.
Sets the clock.
● Setting mode operation
1) Press and hold the [SET] key for at least two seconds in the measurement mode.
In the temperature display section, the character lights up to indicate that the setting mode is
established.
2) Use the [ ▲ ] or [ ▼ ] key to select the desired setting items and press the [ENTER] key to confirm.
3) To end the setting mode, press and hold the [ESC] key for at least two seconds to resume the
measurement mode.