1
Thank you for purchasing the SK-100WP Wall-Mount Waterproof Digital Thermometer.
- This product is designed to measure temperature. Do not use it for other purposes.
- Read this manual thoroughly
before using the SK-100WP. Keep the manual in a safe
place for future reference whenever necessary.
Warning
The SK-100WP is not explosion-proof. Never use it in an atmosphere containing flammable
gases.
Beware of explosion!
There is a risk of explosion. Take extreme care.
1. Notes on Use
Be sure to observe the following precautions in order to use this unit correctly.
- Do not connect the probe if the sensor connector gets wet since the sensor connector itself
is not waterproof structure.
- Do not drop this unit or apply impact to it. This unit is a precision instrument.
- Never disassemble or modify this unit. Doing so may result in failure.
- Do not use this unit in water.
- Do not use this unit in a place exposed to direct sunlight or near heating equipment.
Doing so may result in deformation of the casing or failure.
- Do not use this unit in an environment where electrical noise is generated. Doing so may
result in unstable display or larger errors.
- If this unit is not to be used for a long time, always remove the batteries from the unit.
Otherwise, the batteries may leak fluid, resulting in failure.
- Do not wash or wipe this unit with alcohol, thinner, or other solvents. Also, do not wash it
in water. If the unit becomes dirty, wipe it with a tightly wrung cloth that has been
dipped in warm water with neutral detergent.
- Be sure to use this unit within the specified measurement range. Using the unit outside
the specified measurement range will result in failure or damage.
- When measuring high temperature, be careful not to get burnt.
- Keep the batteries out of the reach of children. If a battery is swallowed accidentally,
consult a medical attention immediately.
** For repair or calibration, contact us or the dealer from which the unit was purchased.
